| Home | Price List | Contact Us |
UPDATE :- JUNE 2006
Plans
for an R13.2m – Design #
53
– centre cockpit have been sold to a client in Turkey.
This
performance cruising yacht hull will be built using cedar strip
construction.
Construction
frames to be cut from computer files.
Shekinah
Boat
Works
at Taree, N.S.W. has started on the deck plug for the R12m
– Design # 70 –
cruising / racing yacht.
Available
with lift keel, 2.45m fixed keel and 2.1m fixed
keel.
An
un-stayed cat rig is being built by WylieCat in Watsonville,
CA
for the first yacht.
Standard
sloop and cutter rig options also available.
A SeaClass 10.6m constructed at Shekinah Boat Works was
delivered to a
sailing school in Melbourne. www.yachtmaster.com.au.
The construction of the hull & deck is to survey.
Another SeaClass 10.6m was delivered to Sydney
in November 2004.
Construction is underway
on the hull & deck for the
15.82m Steam Assisted
Yacht - Design #67 – by Aluminium &
Steel Boats , Maclean, N.S.W.
This yacht will be powered by a coal fired boiler/steam
engine. It will be unpainted aluminium and assembled from kit
components.
Construction continues on
the R18.3m Aluminium Cruising Yacht Design
#66 in Seattle,
USA. Most of the frames and
stringer are now on the building jig.
The hull and deck of this design is available as a
detailed kit, plasma cut ready for assembly.
North Wind Plasma cutting in Seattle
have now cut three (3) of our 14m pilot house yachts and this 18.3m
yacht.
The R450 Pilothouse Steel Cruising Yacht Design
#13 launched in Florida,USA is sold.
“Goodlife”
The first R460 Centre Cockpit Steel Cruising Yacht Design #64
has been launched in Turkey. The hull & deck of
another is nearing completion in Italy.
“Uzaklar II”
The Radford Sprint harbour racing yacht Design
#22 is back in
production with the latest yacht – “Sprint
IV” sailing in Sydney.
"Valiant
VII" is racing with the Royal Yacht Club of Victoria
in Williamstown,
Victoria.
“Horizon Sprint” is now racing with Sandringham
Yacht Club.
“Horizon Sprint” has also won the hotly contested
Range Series in Melbourne
for the second time (2004) on AMS handicap.
“Horizon
Sprint”
The interior of the R415 Centre Cockpit Steel Cruising Yacht Design #61 in
Vancouver, Canada is
underway while another R415 is about start building in Toronto,
Canada.
Another is building in Victoria, Australia, with yet another about to
be fitted out in Tasmania.
The first 14m pilot house cruising yacht –
“Micah
Rose” - built for a client in Juneau, Alaska spent most of
2003 cruising the South Pacific.
The summer was spent in New Zealand and they sailed home to Alaska in
2004.
“Micah Rose”
The metal work of the R14m Aluminium Pilot House Cruising
Yacht Design #47 in
Toronto
is nearing completion, the keel ballasted, engine installed, and work
has started on the interior.
An R14m Pilot House Cruising Yacht hull & deck built
by Reese Marine Vancouver, Canada
was launched in late 2004. The R14m is available as a
detailed hull and deck kit.
Another 14m Aluminium pilot house cruising yacht is building in the
Czech Republic - see www.sailjoohee.com
The aluminium hull & deck kit components were cut by a local
supplier.
A 14m Aft Cockpit Aluminium Cruising Yacht Design
#68 is now available as a detailed hull and deck aluminium
kit. The first yacht, "The Wizard", was launched in Melbourne December
2002 and competed in the 2003 Melbourne to Osaka two-handed
race finishing fourth overall, first in the Cruising A and in front of
all Racing B yachts.
“The
Wizard”
The first R415 Design
#61
is now launched and cruising the Australian East Coast and South
Pacific.
“Masala”
| Home | Price List | Contact Us |